ASA Print Settings: Nozzle & Bed Temperatures
4 sourced ranges from filament and printer makers. Lowest published nozzle temp: 220°C. Enclosure required by at least one maker.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Temperatures by brand
| Filament | Brand | Nozzle °C | Bed °C | Enclosure | Drying | Source |
|---|---|---|---|---|---|---|
| ASA | Prusa (generic) | 220-275 | 90-110 | Recommended | — | Official source |
| ASA | Bambu Lab | 240-280 | 90-100 | Required (enclosed printer) | 80 °C, 8 h (oven) | Official source |
| ASA | Prusament | 260 | 105 first layer / 110 | Recommended (enclosure or draft shield) | — | Official source |
| Generic ASA | Creality (K1 series profile) | 260 | 100 | — | — | Official source |
Which printers can print ASA?
Based on each printer maker's max hotend temperature and enclosure. Hardened-nozzle needs are shown in the finder.
- Bambu Lab P1S (hotend max 300°C)
- Bambu Lab P2S (hotend max 300°C)
- Bambu Lab X1 Carbon (hotend max 300°C)
- Bambu Lab X1E (hotend max 320°C)
- Bambu Lab H2D (hotend max 350°C)
- Prusa Core One (hotend max 290°C)
- Creality K1 (hotend max 300°C)
- Creality K1C (hotend max 300°C)
- Creality K1 Max (hotend max 300°C)
- Creality K2 Plus (hotend max 350°C)
- Elegoo Centauri Carbon (hotend max 320°C)
- QIDI Q1 Pro (hotend max 350°C)
- Snapmaker J1 (hotend max 300°C)
Not verified yet: QIDI Plus4, Snapmaker Artisan, Snapmaker U1
Sponsored · Ad space available
Other filaments
PLA · PLA+ · PETG · PCTG · ABS · TPU · PC · PA / Nylon · PA-CF · PLA-CF · PETG-CF · CF/GF composite · PVA / BVOH · HIPS · PP