AtomStack Kraft (20W diode + 1.2W IR) Plastics & Laminates Settings (Engrave)
13 sourced settings for plastics & laminates on the AtomStack Kraft (20W diode + 1.2W IR) (20W diode).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Two color plate | — | engrave (bitmap) | 80.0% | 333.33 mm/s | 1 | 0.08 mm | Official source |
| Plastic | — | engrave (bitmap) | 80.0% | 333.33 mm/s | 1 | 0.1 mm | Official source |
| PCB Board | — | engrave (bitmap) | 80.0% | 75.0 mm/s | 1 | 0.1 mm | Official source |
| ABS | — | engrave (bitmap) | 80.0% | 83.33 mm/s | 1 | 0.01 mm | Official source |
| Colored plastics | — | engrave (bitmap) | 60.0% | 66.67 mm/s | 1 | 0.01 mm | Official source |
| Mobile phone case | — | engrave (bitmap) | 80.0% | 100.0 mm/s | 1 | 0.01 mm | Official source |
| Green plastic | — | engrave (bitmap) | 80.0% | 16.67 mm/s | 1 | 0.01 mm | Official source |
| Two color plate | — | engrave (vector line) | 8.0% | 8.33 mm/s | 1 | — | Official source |
| Plastic | — | engrave (vector line) | 15.0% | 16.67 mm/s | 1 | — | Official source |
| ABS | — | engrave (vector line) | 30.0% | 8.33 mm/s | 1 | — | Official source |
| Colored plastics | — | engrave (vector line) | 35.0% | 8.33 mm/s | 1 | — | Official source |
| Mobile phone case | — | engrave (vector line) | 50.0% | 33.33 mm/s | 1 | — | Official source |
| Green plastic | — | engrave (vector line) | 80.0% | 8.33 mm/s | 1 | — | Official source |
Sponsored · Ad space available