Creality Falcon A1 Pro 20W (+2W IR) Plywood Settings (Cut & Engrave)
12 sourced settings for plywood on the Creality Falcon A1 Pro 20W (+2W IR) (20W diode + 2W infrared), thickness 3 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| A4 basswood plywood, A4 oak plywood | 3 mm | cut | 100% | 8.33 mm/s | 1 | — | Official source |
| Rosewood plywood | 3 mm | cut | 100% | 6.67 mm/s | 1 | — | Official source |
| Peach blossom plywood | 3 mm | cut | 100% | 6.67 mm/s | 1 | — | Official source |
| Basswood plywood | 3 mm | cut | 100% | 8.33 mm/s | 1 | — | Official source |
| Oak plywood | 3 mm | cut | 100% | 6.67 mm/s | 1 | — | Official source |
| Basswood plywood 198*198 | 3 mm | cut | 100% | 6.67 mm/s | 1 | — | Official source |
| A4 basswood plywood, A4 oak plywood | 3 mm | engrave | 30% | 83.33 mm/s | 1 | — | Official source |
| Rosewood plywood | 3 mm | engrave | 5% | 16.67 mm/s | 1 | — | Official source |
| Peach blossom plywood | 3 mm | engrave | 5% | 16.67 mm/s | 1 | — | Official source |
| Basswood plywood | 3 mm | engrave | 30% | 83.33 mm/s | 1 | — | Official source |
| Oak plywood | 3 mm | engrave | 20% | 50.0 mm/s | 1 | — | Official source |
| Basswood plywood 198*198 | 3 mm | engrave | 30% | 83.33 mm/s | 1 | — | Official source |
Sponsored · Ad space available