Epilog Zing 24 30W Laser Settings
30W CO2 · 0 official, 79 community settings
Open Epilog Zing 24 30W in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Plywood (11 settings) · open in finder
- Leather (9 settings) · open in finder
- Foam, Rubber & Cork (8 settings) · open in finder
- MDF (7 settings) · open in finder
- Paper & Cardboard (7 settings) · open in finder
- Acrylic (6 settings) · open in finder
- Fabric & Felt (6 settings) · open in finder
- Slate, Stone & Tile (6 settings) · open in finder
- Bamboo (5 settings) · open in finder
- Anodized aluminum (5 settings) · open in finder
- Hardwood (4 settings) · open in finder
- Basswood (2 settings) · open in finder
- Stainless steel (2 settings) · open in finder
- Glass (1 settings) · open in finder
Epilog Zing 24 30W settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Hardboard | — | cut | 100.0% | — | 1 | — | Community source |
| Corrugated Cardboard | — | cut | 25.0% | — | 1 | — | Community source |
| Poplar Plywood | — | cut | 100.0% | — | 1 | — | Community source |
| Plywood | — | cut | 100.0% | — | 1 | — | Community source |
| Acrylic | — | cut | 100.0% | — | 1 | — | Community source |
| Plywood | — | cut | 60.0% | — | 1 | — | Community source |
| Rubber Stamp Material | — | cut | 100.0% | — | 1 | — | Community source |
| Genuine Leather | — | cut | 50.0% | — | 1 | — | Community source |
| Cork | — | cut | 50.0% | — | 1 | — | Community source |
| Kraft Paper | — | cut | 8.0% | 95.0 mm/s | 1 | — | Community source |
| Faux Leather | — | cut | 52.0% | 28.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | cut | 45.0% | 30.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 38.0% | 40.0 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 82.0% | 18.0 mm/s | 1 | — | Community source |
| Cork | — | cut | 35.0% | 35.0 mm/s | 1 | — | Community source |
| Rubber | — | cut | 85.0% | 10.0 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 95.0% | 5.0 mm/s | 2 | — | Community source |
| Maple | — | cut | 80.0% | 8.0 mm/s | 2 | — | Community source |
| Walnut | — | cut | 80.0% | 8.0 mm/s | 2 | — | Community source |
| Cardstock | — | cut | 28.0% | 38.0 mm/s | 1 | — | Community source |
| Basswood | — | cut | 70.0% | 15.0 mm/s | 1 | — | Community source |
| Cardboard | — | cut | 25.0% | 200.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 70.0% | 30.0 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 48.0% | 22.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 100.0% | — | 1 | — | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | cut | 65.0% | 20.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 60.0% | 32.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 65.0% | 28.0 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | cut | 80.0% | 18.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 55.0% | 35.0 mm/s | 1 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 88.0% | 8.0 mm/s | 2 | — | Community source |
| 6mm MDF | 6.0 mm | cut | 85.0% | 15.0 mm/s | 1 | — | Community source |
| Anodized Aluminum | — | engrave | 50.0% | — | 1 | — | Community source |
| Hardboard | — | engrave | 50.0% | — | 1 | — | Community source |
| Plywood | — | engrave | 100.0% | — | 1 | — | Community source |
| Rubber Stamp Material | — | engrave | 100.0% | — | 1 | — | Community source |
| Marble Tile | — | engrave | 65.0% | — | 1 | — | Community source |
| Marble Tile | — | engrave | 55.0% | — | 1 | — | Community source |
| Genuine Leather | — | engrave | 40.0% | — | 1 | — | Community source |
| Genuine Leather | — | engrave | 35.0% | — | 1 | — | Community source |
Showing 40 of 79. See all in the finder.
Sponsored · Ad space available
Similar machines
- Epilog Fusion Maker 36 50W (50W CO2)
- Epilog Fusion Pro 24 60W (60W CO2)
- Epilog Fusion Pro 24 80W (80W CO2)
- Flux Beamo 30W (30W CO2)
- OMTech Polar 30W (30W CO2)
- Thunder Bolt 30W (30W CO2)