Flux Beambox Pro 50W Laser Settings
50W CO2 · 0 official, 67 community settings
Open Flux Beambox Pro 50W in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Plywood (10 settings) · open in finder
- Leather (7 settings) · open in finder
- Plastics & Laminates (6 settings) · open in finder
- Foam, Rubber & Cork (6 settings) · open in finder
- Paper & Cardboard (6 settings) · open in finder
- Acrylic (5 settings) · open in finder
- Bamboo (5 settings) · open in finder
- MDF (5 settings) · open in finder
- Fabric & Felt (4 settings) · open in finder
- Hardwood (4 settings) · open in finder
- Slate, Stone & Tile (3 settings) · open in finder
- Basswood (2 settings) · open in finder
- Stainless steel (2 settings) · open in finder
- Glass (1 settings) · open in finder
- Anodized aluminum (1 settings) · open in finder
Flux Beambox Pro 50W settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Acrylic | — | cut | 55.0% | 7.0 mm/s | 1 | — | Community source |
| Acrylic | — | cut | 55.0% | 4.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 55.0% | 4.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 55.0% | 7.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 55.0% | 4.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 55.0% | 2.0 mm/s | 1 | — | Community source |
| Polypropylene (Coroplast) | — | cut | 42.0% | 20.0 mm/s | 1 | — | Community source |
| Delrin / Acetal | — | cut | 72.0% | 15.0 mm/s | 1 | — | Community source |
| Rubber Stamp Material | — | cut | 82.0% | 10.0 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 72.0% | 30.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | cut | 38.0% | 45.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 28.0% | 55.0 mm/s | 1 | — | Community source |
| Faux Leather | — | cut | 42.0% | 40.0 mm/s | 1 | — | Community source |
| Kraft Paper | — | cut | 8.0% | 140.0 mm/s | 1 | — | Community source |
| Cork | — | cut | 35.0% | 40.0 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 80.0% | 5.0 mm/s | 2 | — | Community source |
| Maple | — | cut | 65.0% | 18.0 mm/s | 1 | — | Community source |
| Walnut | — | cut | 65.0% | 18.0 mm/s | 1 | — | Community source |
| Cardstock | — | cut | 22.0% | 50.0 mm/s | 1 | — | Community source |
| Cardboard | — | cut | 42.0% | 40.0 mm/s | 1 | — | Community source |
| Cork | — | cut | 50.0% | 28.0 mm/s | 1 | — | Community source |
| Basswood | — | cut | 60.0% | 24.0 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 48.0% | 32.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 62.0% | 22.0 mm/s | 1 | — | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | cut | 48.0% | 38.0 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | cut | 65.0% | 15.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 60.0% | 24.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 60.0% | 24.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 60.0% | 24.0 mm/s | 1 | — | Community source |
| 6mm MDF | 6.0 mm | cut | 82.0% | 14.0 mm/s | 1 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 78.0% | 16.0 mm/s | 1 | — | Community source |
| Rubber | — | engrave | 40.0% | 150.0 mm/s | 1 | — | Community source |
| Acrylic | — | engrave | 15.0% | 150.0 mm/s | 1 | — | Community source |
| Plywood | — | engrave | 20.0% | 150.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 20.0% | 150.0 mm/s | 1 | — | Community source |
| Glass | — | engrave | 25.0% | 150.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 45.0% | 300.0 mm/s | 1 | — | Community source |
| Polypropylene (Coroplast) | — | engrave | 11.0% | 300.0 mm/s | 1 | — | Community source |
| HDPE (Cutting Board) | — | engrave | 25.0% | 200.0 mm/s | 1 | — | Community source |
| Delrin / Acetal | — | engrave | 23.0% | 250.0 mm/s | 1 | — | Community source |
Showing 40 of 67. See all in the finder.
Sponsored · Ad space available
Similar machines
- Flux Beamo 30W (30W CO2)
- Flux Beambox Pro 80W (80W CO2)
- Epilog Fusion Maker 36 50W (50W CO2)
- Gweike Cloud 50W (50W CO2)
- OMTech CO2 40-50W (general) (50W CO2)
- AtomStack Hurricane (55W CO2)