Glowforge Pro Plastics & Laminates Settings (Cut & Engrave)
12 sourced settings for plastics & laminates on the Glowforge Pro (45W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Rowmark Engraving Plastic | — | cut | 100.0% | 350 Glowforge speed mm/s | 1 | — | Community source |
| Rowmark Engraving Plastic | — | cut | 100.0% | 140 Glowforge speed mm/s | 1 | — | Community source |
| Rowmark Engraving Plastic | — | cut | 100.0% | — | 1 | — | Community source |
| Polypropylene (Coroplast) | — | cut | 47.0% | 10.0 mm/s | 1 | — | Community source |
| Delrin / Acetal | — | cut | 79.0% | 5.0 mm/s | 2 | — | Community source |
| Rowmark Engraving Plastic | — | engrave | 30.0% | 600 Glowforge speed mm/s | 1 | — | Community source |
| Rowmark Engraving Plastic | — | engrave | 15.0% | 1000 Glowforge speed mm/s | 1 | — | Community source |
| Rowmark Engraving Plastic | — | engrave | 30.0% | — | 1 | — | Community source |
| Rowmark Engraving Plastic | — | engrave | 15.0% | — | 1 | — | Community source |
| Polypropylene (Coroplast) | — | engrave | 12.0% | 145.0 mm/s | 1 | — | Community source |
| HDPE (Cutting Board) | — | engrave | 28.0% | 95.0 mm/s | 1 | — | Community source |
| Delrin / Acetal | — | engrave | 25.0% | 120.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available