LaserPecker LP5 (20W diode + 20W fiber) Paper & Cardboard Settings (Cut & Engrave)
12 sourced settings for paper & cardboard on the LaserPecker LP5 (20W diode + 20W fiber) (20W fiber + 20W diode).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Kraft paper | — | cut | 60.0% | — | 1 | — | Official source |
| Cardboard | — | cut | 80.0% | — | 1 | — | Official source |
| Corrugated paper | — | cut | 97.0% | — | 1 | — | Official source |
| Recycled paper | — | cut | 67.0% | — | 1 | — | Official source |
| Kraft paper | — | engrave (fill) | 26.0% | — | 1 | — | Official source |
| Cardboard | — | engrave (fill) | 34.0% | — | 1 | — | Official source |
| Corrugated paper | — | engrave (fill) | 33.0% | — | 1 | — | Official source |
| Recycled paper | — | engrave (fill) | 20.0% | — | 1 | — | Official source |
| Kraft paper | — | engrave (vector line) | 50.0% | — | 1 | — | Official source |
| Cardboard | — | engrave (vector line) | 50.0% | — | 1 | — | Official source |
| Corrugated paper | — | engrave (vector line) | 47.0% | — | 1 | — | Official source |
| Recycled paper | — | engrave (vector line) | 40.0% | — | 1 | — | Official source |
Sponsored · Ad space available