OMTech 40W CO2 Bamboo Settings (Cut & Engrave)
10 sourced settings for bamboo on the OMTech 40W CO2 (40W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Bamboo | — | cut | 50.0% | 22.0 mm/s | 1 | — | Community source |
| Bamboo Cutting Board | — | cut | 85.0% | 14.0 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 68.0% | 18.0 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 100.0% | 4.2 mm/s | 2 | — | Community source |
| Bamboo | — | engrave | 30.0% | 350.0 mm/s | 1 | — | Community source |
| Bamboo | — | engrave | 30.0% | 450.0 mm/s | 1 | — | Community source |
| Bamboo | — | engrave | 16.0% | 310.0 mm/s | 1 | — | Community source |
| Bamboo | — | engrave | 20.0% | 250.0 mm/s | 1 | — | Community source |
| Bamboo | — | engrave | 60.0% | 350.0 mm/s | 1 | 0.1 mm | Community source |
| Bamboo Cutting Board | — | engrave | 35.0% | 250.0 mm/s | 1 | 0.085 mm | Community source |
Sponsored · Ad space available