OMTech 40W CO2 Fabric & Felt Settings (Cut & Engrave)
13 sourced settings for fabric & felt on the OMTech 40W CO2 (40W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Denim Fabric | — | cut | 22.0% | 45.0 mm/s | 1 | — | Community source |
| Felt | — | cut | 16.0% | 45.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 18.0% | 50.0 mm/s | 1 | — | Community source |
| Felt | — | cut | 25.0% | 13.3 mm/s | 1 | — | Community source |
| Denim Fabric | — | cut | 38.0% | 40.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 28.0% | 60.0 mm/s | 1 | — | Community source |
| Felt | — | cut | 35.0% | 30.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | engrave | 8.0% | 350.0 mm/s | 1 | — | Community source |
| Felt | — | engrave | 15.0% | 41.7 mm/s | 1 | — | Community source |
| Cotton Fabric | — | engrave | 16.0% | 280.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | engrave | 18.0% | 300.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | engrave | 20.0% | 200.0 mm/s | 1 | 0.085 mm | Community source |
| Felt | — | engrave | 15.0% | 200.0 mm/s | 1 | 0.1 mm | Community source |
Sponsored · Ad space available