OMTech Polar Lite 55W Laser Settings
55W CO2 · 0 official, 31 community settings
Open OMTech Polar Lite 55W in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- MDF (5 settings) · open in finder
- Plywood (5 settings) · open in finder
- Leather (4 settings) · open in finder
- Fabric & Felt (4 settings) · open in finder
- Bamboo (3 settings) · open in finder
- Slate, Stone & Tile (3 settings) · open in finder
- Paper & Cardboard (2 settings) · open in finder
- Foam, Rubber & Cork (2 settings) · open in finder
- Acrylic (2 settings) · open in finder
- Stainless steel (1 settings) · open in finder
OMTech Polar Lite 55W settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Kraft Paper | — | cut | 8.0% | 145.0 mm/s | 1 | — | Community source |
| Faux Leather | — | cut | 40.0% | 44.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | cut | 36.0% | 48.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 26.0% | 58.0 mm/s | 1 | — | Community source |
| Rubber Stamp Material | — | cut | 82.0% | 10.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 65.0% | 14.0 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 70.0% | 33.0 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 46.0% | 35.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 35.0% | 25.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 58.0% | 22.0 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | cut | 50.0% | 18.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 75.0% | 30.0 mm/s | 1 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 75.0% | 17.0 mm/s | 1 | — | Community source |
| 6mm MDF | 6.0 mm | cut | 78.0% | 15.0 mm/s | 1 | — | Community source |
| Kraft Paper | — | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
| Bamboo Cutting Board | — | engrave | 28.0% | 290.0 mm/s | 1 | — | Community source |
| Faux Leather | — | engrave | 11.0% | 500.0 mm/s | 1 | — | Community source |
| Ceramic Tile | — | engrave | 52.0% | 290.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | engrave | 10.0% | 450.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | engrave | 9.0% | 500.0 mm/s | 1 | — | Community source |
| Rubber Stamp Material | — | engrave | 29.0% | 195.0 mm/s | 1 | — | Community source |
| Marble Tile | — | engrave | 45.0% | 100.0 mm/s | 1 | — | Community source |
| Stainless Steel | — | engrave | 53.0% | 260.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 22.0% | 250.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 60.0% | 300.0 mm/s | 1 | — | Community source |
| Bamboo | — | engrave | 20.0% | 395.0 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | engrave | 16.0% | 430.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | engrave | 16.0% | 385.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 28.0% | 350.0 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | engrave | 15.0% | 250.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 28.0% | 450.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available
Similar machines
- OMTech Polar+ 55W (55W CO2)
- OMTech 60W CO2 (60W CO2)
- OMTech CO2 40-50W (general) (50W CO2)
- OMTech CO2 40-60W (general) (60W CO2)
- OMTech 40W CO2 (40W CO2)
- OMTech 80W CO2 (80W CO2)