Sculpfun S30 Pro 20W Foam, Rubber & Cork Settings (Cut & Engrave)

Name: Sculpfun S30 Pro 20W Foam, Rubber & Cork Settings (Cut & Engrave)
Creator: MakerDial

18 sourced settings for foam, rubber & cork on the Sculpfun S30 Pro 20W (20W diode), thickness 3, 5, 6 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Foam	—	cut	22.0%	16.7 mm/s	1	—	Community source
Cork	—	cut	60.0%	75.0 mm/s	1	—	Community source
Rubber Stamp Material	—	cut	100.0%	13.3 mm/s	2	—	Community source
Cork	—	cut	45.0%	33.3 mm/s	2	—	Community source
Cork	—	cut	45.0%	83.3 mm/s	1	—	Community source
EVA Foam 3mm	3.0 mm	cut	50.0%	116.7 mm/s	1	—	Community source
EVA Foam 3mm	3.0 mm	cut	55.0%	16.7 mm/s	1	—	Community source
Foam Board 5mm	5.0 mm	cut	42.0%	83.3 mm/s	2	—	Community source
EVA Foam 6mm	6.0 mm	cut	45.0%	75.0 mm/s	1	—	Community source
Photopolymer Stamp Blank	—	engrave	60.0%	41.7 mm/s	1	—	Community source
Foam	—	engrave	12.0%	58.3 mm/s	1	—	Community source
Cork	—	engrave	35.0%	116.7 mm/s	1	—	Community source
Cork	—	engrave	20.0%	133.3 mm/s	1	—	Community source
Rubber Stamp Material	—	engrave	82.0%	46.7 mm/s	1	—	Community source
Cork	—	engrave	25.0%	116.7 mm/s	1	0.1 mm	Community source
EVA Foam 3mm	3.0 mm	engrave	25.0%	50.0 mm/s	1	—	Community source
Foam Board 5mm	5.0 mm	engrave	20.0%	133.3 mm/s	1	—	Community source
EVA Foam 6mm	6.0 mm	engrave	20.0%	133.3 mm/s	1	—	Community source

Sponsored · Ad space available