Sculpfun S70 Max 70W Laser Settings
70W diode · 10 official, 0 community settings
Open Sculpfun S70 Max 70W in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Slate, Stone & Tile (2 settings) · open in finder
- Plywood (1 settings) · open in finder
- MDF (1 settings) · open in finder
- Anodized aluminum (1 settings) · open in finder
- Leather (1 settings) · open in finder
- Paper & Cardboard (1 settings) · open in finder
- Acrylic (1 settings) · open in finder
- Stainless steel (1 settings) · open in finder
- Fabric & Felt (1 settings) · open in finder
Sculpfun S70 Max 70W settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Basswood plywood | — | engrave | 20.0% | 333.3 mm/s | 1 | 0.1 mm | Official source |
| MDF | — | engrave | 10.0% | 333.3 mm/s | 1 | 0.1 mm | Official source |
| Black anodized aluminum | — | engrave | 20.0% | 333.3 mm/s | 1 | 0.1 mm | Official source |
| Stone | — | engrave | 25.0% | 333.3 mm/s | 1 | 0.1 mm | Official source |
| Leather | — | engrave | 20.0% | 166.7 mm/s | 1 | 0.1 mm | Official source |
| Kraft paper | — | engrave | 5.0% | 83.3 mm/s | 1 | 0.1 mm | Official source |
| Acrylic | — | engrave | 15.0% | 333.3 mm/s | 1 | 0.1 mm | Official source |
| Stainless steel | — | engrave | 100.0% | 333.3 mm/s | 1 | 0.1 mm | Official source |
| Tile | — | engrave | 100.0% | 75.0 mm/s | 1 | 0.1 mm | Official source |
| Denim | — | engrave | 25.0% | 333.3 mm/s | 1 | 0.1 mm | Official source |
Sponsored · Ad space available
Similar machines
- Sculpfun SF-A9 40W (40W diode)
- Sculpfun S30 Ultra 33W (33W diode)
- Sculpfun S30 Ultra 22W (22W diode)
- Sculpfun S30 Pro 20W (20W diode)
- Sculpfun S30 Pro Max 20W (20W diode)
- Sculpfun SF-A9 20W (20W diode)