Thunder Nova 24 40W Laser Settings

40W CO2 · 0 official, 15 community settings

Open Thunder Nova 24 40W in the settings finder →

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Materials with settings

Thunder Nova 24 40W settings (power, speed, passes)

MaterialThickJobPowerSpeedPassesIntervalSource
Polypropylene (Coroplast)—cut33.0%25.0 mm/s1—Community source
Delrin / Acetal—cut55.0%15.0 mm/s1—Community source
Genuine Leather—cut65.0%14.0 mm/s1—Community source
3mm MDF3.0 mmcut75.0%30.0 mm/s1—Community source
3mm Clear Acrylic3.0 mmcut50.0%18.0 mm/s1—Community source
3mm Basswood Plywood3.0 mmcut35.0%25.0 mm/s1—Community source
Polypropylene (Coroplast)—engrave8.0%300.0 mm/s1—Community source
HDPE (Cutting Board)—engrave19.0%200.0 mm/s1—Community source
Delrin / Acetal—engrave17.0%250.0 mm/s1—Community source
Slate—engrave60.0%300.0 mm/s1—Community source
Genuine Leather—engrave22.0%250.0 mm/s1—Community source
3mm MDF3.0 mmengrave28.0%450.0 mm/s1—Community source
3mm Clear Acrylic3.0 mmengrave15.0%250.0 mm/s1—Community source
3mm Basswood Plywood3.0 mmengrave28.0%350.0 mm/s1—Community source
Rowmark Engraving Plastic—score8.0%250.0 mm/s1—Community source
Sponsored · Ad space available

Similar machines