xTool F2 Ultra (60W MOPA + 40W diode) Plywood Settings (Cut & Engrave)
3 sourced settings for plywood on the xTool F2 Ultra (60W MOPA + 40W diode) (60W MOPA fiber + 40W diode), thickness 3 mm.
Open in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|
| 1/8"(3mm) Basswood Plywood | 3.0 mm | cut | 70.0% | 40.0 mm/s | 4 | — | Community source |
| 1/8"(3mm) Basswood Plywood | 3.0 mm | engrave (fill) | 90.0% | 1250.0 mm/s | 1 | — | Community source |
| 1/8"(3mm) Basswood Plywood | 3.0 mm | score (line) | 90.0% | 400.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available