xTool S1 40W diode Stainless steel Settings (Bitmap engrave & Engrave & Vector engrave)
13 sourced settings for stainless steel on the xTool S1 40W diode (40W diode).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Stainless steel | — | bitmap engrave | 80.0% | 220.0 mm/s | 1 | 0.1 mm | Official source |
| Stainless steel | — | vector engrave | 60.0% | 240.0 mm/s | 1 | 0.05 mm | Official source |
| Stainless steel | — | vector score | 60.0% | 40.0 mm/s | 1 | — | Official source |
| 304 Stainless Steel | — | engrave | 80.0% | 220.0 mm/s | 1 | — | Community source |
| Coated Stainless Steel Tumbler | — | engrave | 80.0% | 33.3 mm/s | 1 | — | Community source |
| Coated Stainless Steel Tumbler | — | engrave | 75.0% | 41.7 mm/s | 1 | — | Community source |
| Coated Stainless Steel Tumbler | — | engrave | 75.0% | 30.0 mm/s | 1 | — | Community source |
| Stainless Steel | — | engrave | 90.0% | 58.3 mm/s | 1 | — | Community source |
| Coated Stainless Steel Tumbler | — | engrave | 65.0% | 50.0 mm/s | 1 | 0.085 mm | Community source |
| 304 Stainless Steel | — | engrave (fill) | 38.0% | 300.0 mm/s | 1 | — | Community source |
| Stainless Steel | — | mark | 100.0% | 6.7 mm/s | 1 | — | Community source |
| Stainless Steel | — | mark | 95.0% | 8.3 mm/s | 1 | — | Community source |
| 304 Stainless Steel | — | score (line) | 28.0% | 6.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available