Acmer P2 33W Laser Settings
33W diode · 0 official, 75 community settings
Open Acmer P2 33W in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Plywood (13 settings) · open in finder
- MDF (10 settings) · open in finder
- Paper & Cardboard (8 settings) · open in finder
- Acrylic (8 settings) · open in finder
- Leather (7 settings) · open in finder
- Hardwood (6 settings) · open in finder
- Bamboo (5 settings) · open in finder
- Fabric & Felt (4 settings) · open in finder
- Foam, Rubber & Cork (4 settings) · open in finder
- Stainless steel (3 settings) · open in finder
- Slate, Stone & Tile (3 settings) · open in finder
- Anodized aluminum (2 settings) · open in finder
- Basswood (1 settings) · open in finder
- Glass (1 settings) · open in finder
Acmer P2 33W settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Plywood | — | cut | 100.0% | 8.3 mm/s | 1 | — | Community source |
| Plywood | — | cut | 100.0% | 6.7 mm/s | 1 | — | Community source |
| Plywood | — | cut | 100.0% | 5.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 100.0% | 3.3 mm/s | 1 | — | Community source |
| Plywood | — | cut | 100.0% | 1.7 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 100.0% | 6.7 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 100.0% | 3.3 mm/s | 1 | — | Community source |
| Pine | — | cut | 100.0% | 8.3 mm/s | 1 | — | Community source |
| Pine | — | cut | 100.0% | 3.3 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 100.0% | 75.0 mm/s | 1 | — | Community source |
| Kraft Paper | — | cut | 100.0% | 75.0 mm/s | 1 | — | Community source |
| MDF | — | cut | 100.0% | 13.3 mm/s | 1 | — | Community source |
| MDF | — | cut | 100.0% | 11.7 mm/s | 1 | — | Community source |
| MDF | — | cut | 100.0% | 3.3 mm/s | 1 | — | Community source |
| Acrylic | — | cut | 100.0% | 6.7 mm/s | 1 | — | Community source |
| Acrylic | — | cut | 100.0% | 3.3 mm/s | 1 | — | Community source |
| Acrylic | — | cut | 100.0% | 3.3 mm/s | 2 | — | Community source |
| Acrylic | — | cut | 100.0% | 3.3 mm/s | 4 | — | Community source |
| Acrylic | — | cut | 100.0% | 3.3 mm/s | 6 | — | Community source |
| Bamboo | — | cut | 75.0% | 41.7 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 55.0% | 83.3 mm/s | 1 | — | Community source |
| Denim Fabric | — | cut | 60.0% | 83.3 mm/s | 1 | — | Community source |
| Faux Leather | — | cut | 55.0% | 58.3 mm/s | 1 | — | Community source |
| Kraft Paper | — | cut | 22.0% | 41.7 mm/s | 1 | — | Community source |
| Cork | — | cut | 65.0% | 50.0 mm/s | 1 | — | Community source |
| Cork | — | cut | 40.0% | 33.3 mm/s | 2 | — | Community source |
| Maple | — | cut | 100.0% | 50.0 mm/s | 2 | — | Community source |
| Walnut | — | cut | 100.0% | 50.0 mm/s | 2 | — | Community source |
| Cardstock | — | cut | 20.0% | 100.0 mm/s | 1 | — | Community source |
| Cardboard | — | cut | 25.0% | 50.0 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 65.0% | 66.7 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 78.0% | 41.7 mm/s | 1 | — | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | cut | 85.0% | 66.7 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 75.0% | 8.3 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 72.0% | 10.0 mm/s | 1 | — | Community source |
| 3mm Black Acrylic | 3.0 mm | cut | 90.0% | 25.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 90.0% | 10.0 mm/s | 1 | — | Community source |
| 6mm MDF | 6.0 mm | cut | 90.0% | 3.3 mm/s | 2 | — | Community source |
| 6mm Basswood Plywood | 6.0 mm | cut | 88.0% | 4.2 mm/s | 1 | — | Community source |
| Basswood | — | engrave | 100.0% | 216.7 mm/s | 1 | 0.12 mm | Community source |
Showing 40 of 75. See all in the finder.
Sponsored · Ad space available
Similar machines
- Sculpfun S30 Ultra 33W (33W diode)
- AtomStack A40 Max (40W diode)
- AtomStack A40 Pro (40W diode)
- AtomStack A40 Pro V2 (40W diode)
- Bambu Lab Module 40W (40W diode)
- Creality Falcon 2 40W (40W diode)