Acmer P2 33W MDF Settings (Cut & Engrave)
10 sourced settings for mdf on the Acmer P2 33W (33W diode), thickness 2, 3, 6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| MDF | — | cut | 100.0% | 13.3 mm/s | 1 | — | Community source |
| MDF | — | cut | 100.0% | 11.7 mm/s | 1 | — | Community source |
| MDF | — | cut | 100.0% | 3.3 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 65.0% | 66.7 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 90.0% | 10.0 mm/s | 1 | — | Community source |
| 6mm MDF | 6.0 mm | cut | 90.0% | 3.3 mm/s | 2 | — | Community source |
| MDF | — | engrave | 65.0% | 333.3 mm/s | 1 | 0.12 mm | Community source |
| Chipboard 2mm | 2.0 mm | engrave | 35.0% | 125.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 40.0% | 33.3 mm/s | 1 | — | Community source |
| 6mm MDF | 6.0 mm | engrave | 40.0% | 33.3 mm/s | 1 | — | Community source |
Sponsored · Ad space available