AtomStack Kraft (20W diode + 1.2W IR) MDF Settings (Cut & Engrave)
10 sourced settings for mdf on the AtomStack Kraft (20W diode + 1.2W IR) (20W diode), thickness 3, 5 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| MDF | 3.0 mm | cut | 80.0% | 1.67 mm/s | 1 | — | Official source |
| MDF | 5.0 mm | cut | 80.0% | 8.33 mm/s | 7 | — | Official source |
| MDF | — | engrave (bitmap) | 80.0% | 333.33 mm/s | 1 | 0.1 mm | Official source |
| MDF | — | engrave (vector line) | 6.0% | 8.33 mm/s | 1 | — | Official source |
| MDF | — | cut | 80.0% | 1.7 mm/s | 1 | — | Community source |
| MDF | — | cut | 80.0% | 8.3 mm/s | 7 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 100.0% | 3.3 mm/s | 2 | — | Community source |
| MDF | — | engrave | 80.0% | 333.3 mm/s | 1 | 0.1 mm | Community source |
| MDF | — | engrave | 6.0% | 8.3 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 45.0% | 33.3 mm/s | 1 | — | Community source |
Sponsored · Ad space available