xTool S1 40W diode MDF Settings (Cut & Engrave)

Name: xTool S1 40W diode MDF Settings (Cut & Engrave)
Creator: MakerDial

13 sourced settings for mdf on the xTool S1 40W diode (40W diode), thickness 2, 3, 6 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Hardboard	—	cut	100.0%	6.7 mm/s	2	—	Community source
Chipboard 2mm	2.0 mm	cut	58.0%	83.3 mm/s	1	—	Community source
Chipboard 2mm	2.0 mm	cut	55.0%	75.0 mm/s	2	—	Community source
Chipboard 2mm	2.0 mm	cut	65.0%	33.3 mm/s	1	—	Community source
3mm MDF	3.0 mm	cut	100.0%	10.0 mm/s	1	—	Community source
3mm MDF	3.0 mm	cut	100.0%	13.0 mm/s	1	—	Community source
6mm MDF	6.0 mm	cut	100.0%	5.0 mm/s	2	—	Community source
6mm MDF	6.0 mm	cut	88.0%	2.5 mm/s	1	—	Community source
Hardboard	—	engrave	45.0%	33.3 mm/s	1	—	Community source
Chipboard 2mm	2.0 mm	engrave	32.0%	141.7 mm/s	1	—	Community source
3mm MDF	3.0 mm	engrave	70.0%	83.3 mm/s	1	—	Community source
3mm MDF	3.0 mm	engrave	30.0%	200.0 mm/s	1	—	Community source
6mm MDF	6.0 mm	engrave	40.0%	33.3 mm/s	1	—	Community source

Sponsored · Ad space available