xTool D1 Pro 20W MDF Settings (Cut & Engrave)
11 sourced settings for mdf on the xTool D1 Pro 20W (20W diode), thickness 2, 3 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Hardboard (3mm HDF) | — | cut | 100.0% | 3.3 mm/s | 2 | — | Community source |
| MDF (3mm) | — | cut | 100.0% | 3.3 mm/s | 2 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 80.0% | 50.0 mm/s | 2 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 65.0% | 58.3 mm/s | 2 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 85.0% | 16.7 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 100.0% | 4.2 mm/s | 3 | — | Community source |
| Hardboard (3mm HDF) | — | engrave | 65.0% | 50.0 mm/s | 1 | 0.1 mm | Community source |
| MDF (3mm) | — | engrave | 60.0% | 50.0 mm/s | 1 | 0.1 mm | Community source |
| Chipboard 2mm | 2.0 mm | engrave | 40.0% | 108.3 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 60.0% | 41.7 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 60.0% | 41.7 mm/s | 1 | 0.1 mm | Community source |
Sponsored · Ad space available