Sculpfun S30 Pro 20W MDF Settings (Cut & Engrave)

Name: Sculpfun S30 Pro 20W MDF Settings (Cut & Engrave)
Creator: MakerDial

12 sourced settings for mdf on the Sculpfun S30 Pro 20W (20W diode), thickness 2, 2.7, 3, 5, 6 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Mdf	2.7 mm	cut	100.0%	6.8 mm/s	1	—	Official source
Mdf	5.0 mm	cut	100.0%	6.7 mm/s	2	—	Official source
Mdf	—	engrave	15.0%	50.0 mm/s	1	—	Official source
Hardboard	—	cut	100.0%	5.0 mm/s	2	—	Community source
Chipboard 2mm	2.0 mm	cut	65.0%	70.0 mm/s	1	—	Community source
Chipboard 2mm	2.0 mm	cut	65.0%	58.3 mm/s	2	—	Community source
Chipboard 2mm	2.0 mm	cut	70.0%	30.0 mm/s	1	—	Community source
3mm MDF	3.0 mm	cut	100.0%	6.7 mm/s	1	—	Community source
6mm MDF	6.0 mm	cut	92.0%	3.3 mm/s	2	—	Community source
Hardboard	—	engrave	45.0%	33.3 mm/s	1	—	Community source
3mm MDF	3.0 mm	engrave	45.0%	33.3 mm/s	1	—	Community source
6mm MDF	6.0 mm	engrave	40.0%	33.3 mm/s	1	—	Community source

Sponsored · Ad space available