Flux Beamo 30W Leather Settings (Cut & Engrave)
9 sourced settings for leather on the Flux Beamo 30W (30W CO2), thickness 3 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Genuine Leather | — | cut | 60.0% | 3.0 mm/s | 2 | — | Community source |
| Genuine Leather | — | cut | 60.0% | 3.0 mm/s | 1 | — | Community source |
| Faux Leather | — | cut | 52.0% | 28.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 65.0% | 22.0 mm/s | 1 | — | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | cut | 65.0% | 20.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 30.0% | 150.0 mm/s | 1 | — | Community source |
| Faux Leather | — | engrave | 12.0% | 400.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 18.0% | 250.0 mm/s | 1 | 0.102 mm | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | engrave | 25.0% | 250.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available