xTool P2 55W CO2 Leather Settings (Bitmap engrave & Cut & Engrave)
14 sourced settings for leather on the xTool P2 55W CO2 (55W CO2), thickness 3 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Leather | — | bitmap engrave | 10.0% | 400.0 mm/s | 1 | 0.1 mm | Official source |
| Leather | — | cut | 100% | 30 mm/s | 1 | — | Official source |
| Leather | — | engrave (bitmap) | 12% | 600 mm/s | 1 | 0.1 mm | Official source |
| Slate / rock coaster | — | engrave (bitmap) | 12% | 500 mm/s | 1 | 0.05 mm | Official source |
| Leather | — | engrave (vector) | 7% | 160 mm/s | 1 | — | Official source |
| Slate / rock coaster | — | engrave (vector) | 15% | 160 mm/s | 1 | — | Official source |
| Faux Leather | — | cut | 40.0% | 45.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 45.0% | 45.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 60.0% | 19.0 mm/s | 1 | — | Community source |
| Faux Leather | — | cut | 34.0% | 48.0 mm/s | 1 | — | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | cut | 45.0% | 42.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 15.0% | 500.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 20.0% | 350.0 mm/s | 1 | 0.085 mm | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | engrave | 14.0% | 380.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available