Genmitsu LE5040 5W Laser Settings
5W diode · 0 official, 7 community settings
Open Genmitsu LE5040 5W in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Leather (2 settings) · open in finder
- MDF (2 settings) · open in finder
- Plywood (2 settings) · open in finder
- Slate, Stone & Tile (1 settings) · open in finder
Genmitsu LE5040 5W settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Genuine Leather | — | cut | 95.0% | 6.7 mm/s | 2 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 100.0% | 2.5 mm/s | 5 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 100.0% | 1.3 mm/s | 6 | — | Community source |
| Slate | — | engrave | 72.0% | 30.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 50.0% | 30.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 45.0% | 33.3 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 60.0% | 41.7 mm/s | 1 | — | Community source |
Sponsored · Ad space available
Similar machines
- Creality Falcon CR 5W (5W diode)
- LaserPecker LP2 5W (5W diode)
- Longer Ray5 5W (5W diode)
- Sculpfun iCube 5W (5W diode)
- xTool D1 5W (5W diode)
- xTool D1 Pro 5W (5W diode)