xTool D1 Pro 5W Laser Settings
5W diode · 6 official, 0 community settings
Open xTool D1 Pro 5W in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Plywood (2 settings) · open in finder
- Acrylic (2 settings) · open in finder
- Paper & Cardboard (2 settings) · open in finder
xTool D1 Pro 5W settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Basswood plywood | 3 mm | cut | 100% | 2 mm/s | 2 | — | Official source |
| Walnut Plywood | 3.0 mm | cut | 100.0% | 4.0 mm/s | 3 | — | Official source |
| Dark Red Acrylic Sheet（Opaque,Glossy) | 3.0 mm | cut | 100.0% | 1.0 mm/s | 3 | — | Official source |
| Metal Business Cards | — | raster engrave | 60.0% | 50.0 mm/s | 1 | — | Official source |
| Dark Red Acrylic Sheet（Opaque,Glossy) | 3.0 mm | raster engrave | 100.0% | 50.0 mm/s | 1 | — | Official source |
| Metal Business Cards | — | vector engrave | 100.0% | 50.0 mm/s | 1 | — | Official source |
Sponsored · Ad space available
Similar machines
- xTool D1 5W (5W diode)
- xTool M1 5W (5W diode)
- xTool D1 10W (10W diode)
- xTool D1 Pro 10W (10W diode)
- xTool F1 (10W diode + 2W IR) (10W diode + 2W infrared + 2W fiber)
- xTool M1 10W (10W diode)