xTool D1 10W Laser Settings
10W diode · 11 official, 0 community settings
Open xTool D1 10W in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Plywood (5 settings) · open in finder
- Fabric & Felt (2 settings) · open in finder
- Foam, Rubber & Cork (2 settings) · open in finder
- Acrylic (2 settings) · open in finder
xTool D1 10W settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Denim fabric | — | cut | 100% | 15 mm/s | 1 | — | Official source |
| Rubber magnet sheet | — | cut | 100% | 3 mm/s | 1 | — | Official source |
| Basswood plywood | 1.5 mm | cut | 100% | 9 mm/s | 1 | — | Official source |
| Felt | 1.6 mm | cut | 50% | 20 mm/s | 1 | — | Official source |
| Basswood plywood | 2 mm | cut | 100% | 7 mm/s | 1 | — | Official source |
| EVA foam | 2 mm | cut | 100% | 9 mm/s | 1 | — | Official source |
| Basswood plywood | 3 mm | cut | 100% | 4 mm/s | 1 | — | Official source |
| Acrylic (black, opaque) | 3 mm | cut | 100% | 3 mm/s | 2 | — | Official source |
| Basswood plywood | 3 mm | engrave (bitmap) | 100% | 75 mm/s | 1 | — | Official source |
| Basswood plywood | 3 mm | engrave (vector) | 50% | 35 mm/s | 1 | — | Official source |
| Acrylic (black, opaque) | 3 mm | engrave (vector) | 50% | 50 mm/s | 1 | — | Official source |
Sponsored · Ad space available
Similar machines
- xTool D1 Pro 10W (10W diode)
- xTool F1 (10W diode + 2W IR) (10W diode + 2W infrared + 2W fiber)
- xTool M1 10W (10W diode)
- xTool S1 10W diode (10W diode)
- xTool D1 5W (5W diode)
- xTool D1 Pro 5W (5W diode)