xTool S1 10W diode Laser Settings
10W diode · 0 official, 9 community settings · machine specs
Open xTool S1 10W diode in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Modules & add-ons
- 10W Diode (blue) source
- 2W Infrared 1064nm (optional) — Optional 2W 1064nm IR module: engraves all metals, plastics, black acrylic. Engrave/mark only. source
Materials with settings
- Leather (2 settings) · open in finder
- MDF (2 settings) · open in finder
- Plywood (2 settings) · open in finder
- Slate, Stone & Tile (1 settings) · open in finder
- Fabric & Felt (1 settings) · open in finder
- Paper & Cardboard (1 settings) · open in finder
xTool S1 10W diode settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Genuine Leather | — | cut | 85.0% | 13.3 mm/s | 2 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 100.0% | 4.2 mm/s | 4 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 95.0% | 5.0 mm/s | 2 | — | Community source |
| Slate | — | engrave | 98.0% | 60.0 mm/s | 1 | — | Community source |
| Canvas | — | engrave | 35.0% | 180.0 mm/s | 1 | — | Community source |
| Corrugated Cardboard | — | engrave | 26.0% | 300.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 45.0% | 25.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 45.0% | 33.3 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 55.0% | 58.3 mm/s | 1 | — | Community source |
Sponsored · Ad space available
Similar machines
- xTool D1 10W (10W diode)
- xTool D1 Pro 10W (10W diode)
- xTool F1 (10W diode + 2W IR) (10W diode + 2W infrared + 2W fiber)
- xTool M1 10W (10W diode)
- xTool D1 5W (5W diode)
- xTool D1 Pro 5W (5W diode)