Glowforge Basic Fabric & Felt Settings (Cut & Engrave)
9 sourced settings for fabric & felt on the Glowforge Basic (45W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Denim Fabric | — | cut | 25.0% | 40.0 mm/s | 1 | — | Community source |
| Felt | — | cut | 18.0% | 40.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 20.0% | 45.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | cut | 55.0% | 17.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 50.0% | 15.0 mm/s | 1 | — | Community source |
| Canvas | — | engrave | 40.0% | 1400 Glowforge speed mm/s | 1 | — | Community source |
| Canvas | — | engrave | 40.0% | — | 1 | — | Community source |
| Cotton Fabric | — | engrave | 16.0% | 280.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | engrave | 18.0% | 300.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available