Glowforge Basic Plywood Settings (Cut & Engrave)

Name: Glowforge Basic Plywood Settings (Cut & Engrave)
Creator: MakerDial

21 sourced settings for plywood on the Glowforge Basic (45W CO2), thickness 2, 3, 9 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
3mm Cherry Plywood	—	cut	100.0%	163 Glowforge speed mm/s	1	—	Community source
Plywood	—	cut	70.0%	22.0 mm/s	1	—	Community source
Plywood	—	cut	60.0%	9.0 mm/s	2	—	Community source
Plywood	—	cut	100.0%	—	2	—	Community source
2mm Basswood Plywood	2.0 mm	cut	35.0%	25.0 mm/s	1	—	Community source
3mm Cherry Plywood	3.0 mm	cut	100.0%	—	1	—	Community source
3mm Basswood Plywood	3.0 mm	cut	100.0%	—	1	—	Community source
3mm Walnut Plywood	3.0 mm	cut	100.0%	18.0 mm/s	1	—	Community source
3mm Baltic Birch Plywood	3.0 mm	cut	100.0%	20.0 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	cut	100.0%	25.0 mm/s	1	—	Community source
9mm Birch Plywood	9.0 mm	cut	78.0%	3.0 mm/s	3	—	Community source
Plywood	—	engrave	30.0%	1000 Glowforge speed mm/s	1	—	Community source
Plywood	—	engrave	30.0%	450.0 mm/s	1	—	Community source
Plywood	—	engrave	30.0%	—	1	—	Community source
Plywood	—	engrave	20.0%	140.0 mm/s	1	—	Community source
2mm Basswood Plywood	2.0 mm	engrave	11.0%	380.0 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	engrave	75.0%	—	1	—	Community source
3mm Walnut Plywood	3.0 mm	engrave	30.0%	250.0 mm/s	1	—	Community source
3mm Baltic Birch Plywood	3.0 mm	engrave	30.0%	300.0 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	engrave	40.0%	130.0 mm/s	1	0.094 mm	Community source
9mm Birch Plywood	9.0 mm	engrave	24.0%	100.0 mm/s	1	—	Community source

Sponsored · Ad space available