Glowforge Plus Plywood Settings (Cut & Engrave)
10 sourced settings for plywood on the Glowforge Plus (45W CO2), thickness 3, 6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Plywood | — | cut | 100.0% | — | 2 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 65.0% | 22.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 100.0% | — | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 100.0% | — | 1 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 100.0% | — | 1 | — | Community source |
| Plywood | — | engrave | 30.0% | 1000 Glowforge speed mm/s | 1 | — | Community source |
| Plywood | — | engrave | 30.0% | — | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | engrave | 16.0% | 380.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 75.0% | 500.0 mm/s | 1 | 0.094 mm | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | engrave | 45.0% | 33.3 mm/s | 1 | — | Community source |
Sponsored · Ad space available