Glowforge Plus Laser Settings
45W CO2 · 0 official, 75 community settings
Open Glowforge Plus in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Foam, Rubber & Cork (14 settings) · open in finder
- Paper & Cardboard (12 settings) · open in finder
- Plywood (10 settings) · open in finder
- Leather (8 settings) · open in finder
- Bamboo (5 settings) · open in finder
- MDF (5 settings) · open in finder
- Fabric & Felt (4 settings) · open in finder
- Hardwood (4 settings) · open in finder
- Acrylic (4 settings) · open in finder
- Slate, Stone & Tile (4 settings) · open in finder
- Basswood (2 settings) · open in finder
- Glass (1 settings) · open in finder
- Stainless steel (1 settings) · open in finder
- Anodized aluminum (1 settings) · open in finder
Glowforge Plus settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| EVA Foam 6mm | — | cut | 100.0% | 275 Glowforge speed mm/s | 2 | — | Community source |
| Rubber Stamp Material | — | cut | 75.0% | 12.0 mm/s | 1 | — | Community source |
| Kraft Paper | — | cut | 12.0% | 280.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 100.0% | — | 2 | — | Community source |
| Cork | — | cut | 55.0% | — | 1 | — | Community source |
| Bamboo | — | cut | 100.0% | — | 1 | — | Community source |
| Cardstock | — | cut | 25.0% | — | 1 | — | Community source |
| Cardboard | — | cut | 35.0% | — | 1 | — | Community source |
| Rubber Stamp Material | — | cut | 55.0% | 13.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | cut | 45.0% | 19.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 45.0% | 18.0 mm/s | 1 | — | Community source |
| Bamboo Cutting Board | — | cut | 100.0% | 5.0 mm/s | 2 | — | Community source |
| Genuine Leather | — | cut | 85.0% | 5.0 mm/s | 2 | — | Community source |
| Basswood | — | cut | 45.0% | 5.0 mm/s | 2 | — | Community source |
| Maple | — | cut | 70.0% | 15.0 mm/s | 1 | — | Community source |
| Walnut | — | cut | 70.0% | 15.0 mm/s | 1 | — | Community source |
| Cork | — | cut | 28.0% | 34.0 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 62.0% | 22.0 mm/s | 1 | — | Community source |
| Corrugated Cardboard | — | cut | 36.0% | 42.0 mm/s | 1 | — | Community source |
| Faux Leather | — | cut | 38.0% | 42.0 mm/s | 1 | — | Community source |
| Mylar Stencil 7.5mil | — | cut | 14.0% | 80.0 mm/s | 1 | — | Community source |
| Acrylic Felt | — | cut | 22.0% | 65.0 mm/s | 1 | — | Community source |
| Copy Paper 80gsm | — | cut | 10.0% | 120.0 mm/s | 1 | — | Community source |
| Cardstock 300gsm | — | cut | 14.0% | 100.0 mm/s | 1 | — | Community source |
| Genuine Leather (vegetable tanned 2mm) | — | cut | 65.0% | — | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 48.0% | 34.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 65.0% | 22.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 100.0% | — | 1 | — | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | cut | 50.0% | 32.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 100.0% | — | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | cut | 100.0% | — | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 100.0% | — | 1 | — | Community source |
| Foam Board 5mm | 5.0 mm | cut | 28.0% | 50.0 mm/s | 1 | — | Community source |
| EVA Foam 6mm | 6.0 mm | cut | 100.0% | — | 2 | — | Community source |
| 6mm MDF | 6.0 mm | cut | 80.0% | 14.0 mm/s | 1 | — | Community source |
| EVA Foam 6mm | 6.0 mm | cut | 26.0% | 55.0 mm/s | 1 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 100.0% | — | 1 | — | Community source |
| EVA Foam 6mm | — | engrave | 60.0% | 1000 Glowforge speed mm/s | 1 | — | Community source |
| Plywood | — | engrave | 30.0% | 1000 Glowforge speed mm/s | 1 | — | Community source |
| Plywood | — | engrave | 30.0% | — | 1 | — | Community source |
Showing 40 of 75. See all in the finder.
Sponsored · Ad space available
Similar machines
- Glowforge Basic (45W CO2)
- Glowforge Pro (45W CO2)
- Full Spectrum Muse Core 45W (45W CO2)
- Epilog Fusion Maker 36 50W (50W CO2)
- Flux Beambox Pro 50W (50W CO2)
- Gweike Cloud 50W (50W CO2)