Monport 40W CO2 Leather Settings (Cut & Engrave)
9 sourced settings for leather on the Monport 40W CO2 (40W CO2), thickness 3 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Genuine Leather | — | cut | 20.0% | 25.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 22.0% | 20.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 25.0% | 15.0 mm/s | 1 | — | Community source |
| Faux Leather | — | cut | 45.0% | 35.0 mm/s | 1 | — | Community source |
| Genuine Leather (vegetable tanned 3mm) | — | cut | 55.0% | 10.0 mm/s | 1 | — | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | cut | 55.0% | 28.0 mm/s | 1 | — | Community source |
| Faux Leather | — | engrave | 12.0% | 500.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 25.0% | 200.0 mm/s | 1 | 0.085 mm | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | engrave | 20.0% | 300.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available