Monport Fireproof 60W CO2 Laser Settings
60W CO2 · 0 official, 59 community settings
Open Monport Fireproof 60W CO2 in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Plywood (9 settings) · open in finder
- Leather (8 settings) · open in finder
- Paper & Cardboard (6 settings) · open in finder
- Bamboo (6 settings) · open in finder
- Foam, Rubber & Cork (5 settings) · open in finder
- MDF (5 settings) · open in finder
- Hardwood (4 settings) · open in finder
- Fabric & Felt (4 settings) · open in finder
- Slate, Stone & Tile (4 settings) · open in finder
- Basswood (2 settings) · open in finder
- Acrylic (2 settings) · open in finder
- Stainless steel (2 settings) · open in finder
- Glass (1 settings) · open in finder
- Anodized aluminum (1 settings) · open in finder
Monport Fireproof 60W CO2 settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Genuine Leather (vegetable tanned 3mm) | — | cut | 46.0% | 13.0 mm/s | 1 | — | Community source |
| Maple | — | cut | 60.0% | 20.0 mm/s | 1 | — | Community source |
| Walnut | — | cut | 60.0% | 20.0 mm/s | 1 | — | Community source |
| Cardstock | — | cut | 21.0% | 58.0 mm/s | 1 | — | Community source |
| Cardboard | — | cut | 35.0% | 46.0 mm/s | 1 | — | Community source |
| Cork | — | cut | 46.0% | 33.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 52.0% | 28.0 mm/s | 1 | — | Community source |
| Cork | — | cut | 32.0% | 38.0 mm/s | 1 | — | Community source |
| Basswood (3mm sheet) | — | cut | 51.0% | 28.0 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 73.0% | 5.0 mm/s | 2 | — | Community source |
| Genuine Leather | — | cut | 63.0% | 14.0 mm/s | 1 | — | Community source |
| Rubber Stamp Material | — | cut | 82.0% | 9.6 mm/s | 1 | — | Community source |
| Bamboo Cutting Board | — | cut | 82.0% | 17.0 mm/s | 1 | — | Community source |
| Kraft Paper | — | cut | 7.0% | 152.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 23.0% | 52.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | cut | 37.0% | 31.0 mm/s | 1 | — | Community source |
| Faux Leather | — | cut | 34.0% | 47.0 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 68.0% | 34.0 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 41.0% | 38.0 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | cut | 49.0% | 18.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 46.0% | 25.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 32.0% | 28.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 46.0% | 29.0 mm/s | 1 | — | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | cut | 44.0% | 44.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 52.0% | 28.0 mm/s | 1 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 73.0% | 20.0 mm/s | 1 | — | Community source |
| 6mm MDF | 6.0 mm | cut | 64.0% | 17.0 mm/s | 1 | — | Community source |
| Ceramic Tile | — | engrave | 20.0% | 40.0 mm/s | 1 | — | Community source |
| Glass | — | engrave | 10.0% | 431.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 17.0% | 177.0 mm/s | 1 | — | Community source |
| Basswood | — | engrave | 17.0% | 404.0 mm/s | 1 | — | Community source |
| Maple | — | engrave | 18.0% | 329.0 mm/s | 1 | — | Community source |
| Walnut | — | engrave | 18.0% | 329.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 15.0% | 431.0 mm/s | 1 | — | Community source |
| Anodized Aluminum | — | engrave | 16.0% | 236.0 mm/s | 1 | 0.1 mm | Community source |
| Rubber Stamp Material | — | engrave | 36.0% | 177.0 mm/s | 1 | 0.051 mm | Community source |
| Bamboo Cutting Board | — | engrave | 30.0% | 304.0 mm/s | 1 | 0.085 mm | Community source |
| Slate | — | engrave | 61.0% | 278.0 mm/s | 1 | 0.085 mm | Community source |
| Genuine Leather | — | engrave | 21.0% | 254.0 mm/s | 1 | 0.085 mm | Community source |
| Plywood | — | engrave | 17.0% | 404.0 mm/s | 1 | — | Community source |
Showing 40 of 59. See all in the finder.
Sponsored · Ad space available
Similar machines
- Monport 60W CO2 (60W CO2)
- Monport 40W CO2 (40W CO2)
- Monport 80W CO2 (80W CO2)
- Monport GP 40W CO2 (40W CO2)
- Monport EffI10S 100W CO2 (100W CO2)
- Epilog Fusion Pro 24 60W (60W CO2)