Monport EffI10S 100W CO2 Laser Settings
100W CO2 · 0 official, 59 community settings
Open Monport EffI10S 100W CO2 in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Plywood (9 settings) · open in finder
- Leather (8 settings) · open in finder
- Paper & Cardboard (6 settings) · open in finder
- Bamboo (6 settings) · open in finder
- Foam, Rubber & Cork (5 settings) · open in finder
- MDF (5 settings) · open in finder
- Fabric & Felt (4 settings) · open in finder
- Hardwood (4 settings) · open in finder
- Slate, Stone & Tile (4 settings) · open in finder
- Basswood (2 settings) · open in finder
- Acrylic (2 settings) · open in finder
- Stainless steel (2 settings) · open in finder
- Glass (1 settings) · open in finder
- Anodized aluminum (1 settings) · open in finder
Monport EffI10S 100W CO2 settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Genuine Leather (vegetable tanned 3mm) | — | cut | 36.0% | 19.0 mm/s | 1 | — | Community source |
| Cork | — | cut | 25.0% | 46.0 mm/s | 1 | — | Community source |
| Faux Leather | — | cut | 24.0% | 68.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | cut | 34.0% | 23.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 15.0% | 55.0 mm/s | 1 | — | Community source |
| Kraft Paper | — | cut | 7.0% | 205.0 mm/s | 1 | — | Community source |
| Bamboo Cutting Board | — | cut | 78.0% | 21.0 mm/s | 1 | — | Community source |
| Rubber Stamp Material | — | cut | 78.0% | 12.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 50.0% | 20.0 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 60.0% | 5.0 mm/s | 2 | — | Community source |
| Maple | — | cut | 45.0% | 37.0 mm/s | 1 | — | Community source |
| Walnut | — | cut | 45.0% | 37.0 mm/s | 1 | — | Community source |
| Cardstock | — | cut | 16.0% | 81.0 mm/s | 1 | — | Community source |
| Cardboard | — | cut | 26.0% | 64.0 mm/s | 1 | — | Community source |
| Cork | — | cut | 36.0% | 47.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 40.0% | 42.0 mm/s | 1 | — | Community source |
| Basswood (3mm sheet) | — | cut | 41.0% | 42.0 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 58.0% | 50.0 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 31.0% | 57.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 25.0% | 42.0 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | cut | 42.0% | 32.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 44.0% | 46.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 28.0% | 47.0 mm/s | 1 | — | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | cut | 34.0% | 77.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 40.0% | 42.0 mm/s | 1 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 65.0% | 30.0 mm/s | 1 | — | Community source |
| 6mm MDF | 6.0 mm | cut | 44.0% | 27.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 10.0% | 561.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 13.0% | 218.0 mm/s | 1 | — | Community source |
| Stainless Steel | — | engrave | 45.0% | 361.0 mm/s | 1 | — | Community source |
| Marble Tile | — | engrave | 37.0% | 155.0 mm/s | 1 | — | Community source |
| Faux Leather | — | engrave | 7.0% | 500.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | engrave | 9.0% | 394.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | engrave | 6.0% | 726.0 mm/s | 1 | — | Community source |
| Ceramic Tile | — | engrave | 55.0% | 250.0 mm/s | 1 | — | Community source |
| Bamboo | — | engrave | 36.0% | 589.0 mm/s | 1 | — | Community source |
| Kraft Paper | — | engrave | 7.0% | 500.0 mm/s | 1 | — | Community source |
| Cardstock | — | engrave | 9.0% | 500.0 mm/s | 1 | — | Community source |
| Cardboard | — | engrave | 9.0% | 500.0 mm/s | 1 | — | Community source |
| Cork | — | engrave | 14.0% | 537.0 mm/s | 1 | — | Community source |
Showing 40 of 59. See all in the finder.
Sponsored · Ad space available
Similar machines
- Monport 80W CO2 (80W CO2)
- Monport 60W CO2 (60W CO2)
- Monport Fireproof 60W CO2 (60W CO2)
- Monport 40W CO2 (40W CO2)
- Monport GP 40W CO2 (40W CO2)
- Boss LS-1630 100W (100W CO2)