Boss LS-1630 100W Laser Settings
100W CO2 · 0 official, 77 community settings
Open Boss LS-1630 100W in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Hardwood (14 settings) · open in finder
- Plywood (10 settings) · open in finder
- Leather (7 settings) · open in finder
- MDF (7 settings) · open in finder
- Acrylic (6 settings) · open in finder
- Paper & Cardboard (6 settings) · open in finder
- Fabric & Felt (6 settings) · open in finder
- Bamboo (6 settings) · open in finder
- Foam, Rubber & Cork (6 settings) · open in finder
- Slate, Stone & Tile (4 settings) · open in finder
- Basswood (2 settings) · open in finder
- Stainless steel (1 settings) · open in finder
- Glass (1 settings) · open in finder
- Anodized aluminum (1 settings) · open in finder
Boss LS-1630 100W settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Acrylic | — | cut | 55.0% | 10.0 mm/s | 2 | — | Community source |
| Kraft Paper | — | cut | 7.0% | 200.0 mm/s | 1 | — | Community source |
| Faux Leather | — | cut | 25.0% | 65.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | cut | 30.0% | 32.0 mm/s | 1 | — | Community source |
| Bamboo Cutting Board | — | cut | 80.0% | 20.0 mm/s | 1 | — | Community source |
| Bamboo | — | cut | 60.0% | 50.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 58.0% | 35.0 mm/s | 1 | — | Community source |
| Cork | — | cut | 22.0% | 50.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 35.0% | 50.0 mm/s | 1 | — | Community source |
| Cardboard | — | cut | 22.0% | 50.0 mm/s | 1 | — | Community source |
| Cardstock | — | cut | 15.0% | 50.0 mm/s | 1 | — | Community source |
| Cork | — | cut | 30.0% | 45.0 mm/s | 1 | — | Community source |
| Rubber Stamp Material | — | cut | 85.0% | 17.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 55.0% | 22.0 mm/s | 1 | — | Community source |
| Alder | — | cut | 50.0% | 5.0 mm/s | 2 | — | Community source |
| Bamboo | — | cut | 60.0% | 5.0 mm/s | 2 | — | Community source |
| Maple | — | cut | 45.0% | 35.0 mm/s | 1 | — | Community source |
| Walnut | — | cut | 45.0% | 35.0 mm/s | 1 | — | Community source |
| Felt | — | cut | 22.0% | 16.7 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 18.0% | 20.0 mm/s | 1 | — | Community source |
| Cedar | — | cut | 75.0% | 15.0 mm/s | 1 | — | Community source |
| Pine | — | cut | 80.0% | 13.3 mm/s | 1 | — | Community source |
| Cherry | — | cut | 85.0% | 11.7 mm/s | 1 | — | Community source |
| Oak | — | cut | 90.0% | 10.0 mm/s | 1 | — | Community source |
| Corrugated Cardboard | — | cut | 35.0% | 70.0 mm/s | 1 | — | Community source |
| MDF | — | cut | 70.0% | 14.0 mm/s | 1 | — | Community source |
| Acrylic | — | cut | 55.0% | 15.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 75.0% | 15.0 mm/s | 1 | — | Community source |
| Acrylic (6mm cast) | — | cut | 75.0% | 8.0 mm/s | 1 | — | Community source |
| Basswood (6mm sheet) | — | cut | 65.0% | 25.0 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 20.0% | 33.3 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 60.0% | 28.0 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | cut | 50.0% | 38.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 55.0% | 40.0 mm/s | 1 | — | Community source |
| EVA Foam 3mm | 3.0 mm | cut | 15.0% | 25.0 mm/s | 1 | — | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | cut | 55.0% | 15.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 65.0% | 30.0 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic (Cast) | 3.0 mm | cut | 60.0% | 25.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 25.0% | 50.0 mm/s | 1 | — | Community source |
| 6mm MDF | 6.0 mm | cut | 68.0% | 25.0 mm/s | 1 | — | Community source |
Showing 40 of 77. See all in the finder.
Sponsored · Ad space available
Similar machines
- Boss LS-2440 100W (100W CO2)
- Boss LS-1420 70W (70W CO2)
- Monport EffI10S 100W CO2 (100W CO2)
- Thunder Nova 35 (100W CO2)
- Epilog Fusion Pro 24 80W (80W CO2)
- Flux Beambox Pro 80W (80W CO2)