Boss LS-1630 100W Hardwood Settings (Cut & Engrave)
14 sourced settings for hardwood on the Boss LS-1630 100W (100W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Alder | — | cut | 50.0% | 5.0 mm/s | 2 | — | Community source |
| Maple | — | cut | 45.0% | 35.0 mm/s | 1 | — | Community source |
| Walnut | — | cut | 45.0% | 35.0 mm/s | 1 | — | Community source |
| Cedar | — | cut | 75.0% | 15.0 mm/s | 1 | — | Community source |
| Pine | — | cut | 80.0% | 13.3 mm/s | 1 | — | Community source |
| Cherry | — | cut | 85.0% | 11.7 mm/s | 1 | — | Community source |
| Oak | — | cut | 90.0% | 10.0 mm/s | 1 | — | Community source |
| Maple | — | engrave | 12.0% | 450.0 mm/s | 1 | — | Community source |
| Walnut | — | engrave | 12.0% | 450.0 mm/s | 1 | — | Community source |
| Cedar | — | engrave | 25.0% | 600.0 mm/s | 1 | 0.1 mm | Community source |
| Alder | — | engrave | 30.0% | 550.0 mm/s | 1 | 0.1 mm | Community source |
| Pine | — | engrave | 28.0% | 600.0 mm/s | 1 | 0.1 mm | Community source |
| Cherry | — | engrave | 30.0% | 550.0 mm/s | 1 | 0.1 mm | Community source |
| Oak | — | engrave | 35.0% | 500.0 mm/s | 1 | 0.1 mm | Community source |
Sponsored · Ad space available