Trotec Speedy 400 80W Hardwood Settings (Cut & Engrave)
15 sourced settings for hardwood on the Trotec Speedy 400 80W (80W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Walnut | — | cut | 100.0% | — | 1 | — | Community source |
| Oak | — | cut | 100.0% | — | 1 | — | Community source |
| Maple | — | cut | 100.0% | — | 1 | — | Community source |
| Cherry | — | cut | 100.0% | — | 1 | — | Community source |
| Alder | — | cut | 100.0% | — | 1 | — | Community source |
| Walnut | — | engrave | 60.0% | — | 1 | — | Community source |
| Walnut | — | engrave | 50.0% | — | 1 | — | Community source |
| Oak | — | engrave | 60.0% | — | 1 | — | Community source |
| Oak | — | engrave | 55.0% | — | 1 | — | Community source |
| Maple | — | engrave | 65.0% | — | 1 | — | Community source |
| Maple | — | engrave | 55.0% | — | 1 | — | Community source |
| Cherry | — | engrave | 60.0% | — | 1 | — | Community source |
| Cherry | — | engrave | 50.0% | — | 1 | — | Community source |
| Alder | — | engrave | 65.0% | — | 1 | — | Community source |
| Alder | — | engrave | 60.0% | — | 1 | — | Community source |
Sponsored · Ad space available