Trotec Speedy 400 80W Laser Settings
80W CO2 · 0 official, 25 community settings
Open Trotec Speedy 400 80W in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Hardwood (15 settings) · open in finder
- Leather (2 settings) · open in finder
- MDF (2 settings) · open in finder
- Acrylic (2 settings) · open in finder
- Plywood (2 settings) · open in finder
- Brass, Copper & Other Metals (1 settings) · open in finder
- Slate, Stone & Tile (1 settings) · open in finder
Trotec Speedy 400 80W settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Walnut | — | cut | 100.0% | — | 1 | — | Community source |
| Oak | — | cut | 100.0% | — | 1 | — | Community source |
| Maple | — | cut | 100.0% | — | 1 | — | Community source |
| Cherry | — | cut | 100.0% | — | 1 | — | Community source |
| Alder | — | cut | 100.0% | — | 1 | — | Community source |
| Genuine Leather | — | cut | 55.0% | 22.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 65.0% | 30.0 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | cut | 50.0% | 38.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 25.0% | 50.0 mm/s | 1 | — | Community source |
| Walnut | — | engrave | 60.0% | — | 1 | — | Community source |
| Walnut | — | engrave | 50.0% | — | 1 | — | Community source |
| Oak | — | engrave | 60.0% | — | 1 | — | Community source |
| Oak | — | engrave | 55.0% | — | 1 | — | Community source |
| Maple | — | engrave | 65.0% | — | 1 | — | Community source |
| Maple | — | engrave | 55.0% | — | 1 | — | Community source |
| Cherry | — | engrave | 60.0% | — | 1 | — | Community source |
| Cherry | — | engrave | 50.0% | — | 1 | — | Community source |
| Alder | — | engrave | 65.0% | — | 1 | — | Community source |
| Alder | — | engrave | 60.0% | — | 1 | — | Community source |
| Powder Coated Steel | — | engrave | 35.0% | 500.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 30.0% | 400.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 18.0% | 400.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 30.0% | 91.7 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | engrave | 15.0% | 250.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 20.0% | 500.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available
Similar machines
- Trotec Speedy 100 60W (60W CO2)
- Trotec Speedy 300 (60W CO2)
- Epilog Fusion Pro 24 80W (80W CO2)
- Flux Beambox Pro 80W (80W CO2)
- Monport 80W CO2 (80W CO2)
- OMTech 80W CO2 (80W CO2)