Glowforge Pro Hardwood Settings (Cut & Engrave)
22 sourced settings for hardwood on the Glowforge Pro (45W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Cedar | — | cut | 48.0% | 24.0 mm/s | 1 | — | Community source |
| Alder | — | cut | 50.0% | 24.0 mm/s | 1 | — | Community source |
| Cherry | — | cut | 58.0% | 20.0 mm/s | 1 | — | Community source |
| Oak | — | cut | 65.0% | 18.0 mm/s | 1 | — | Community source |
| Pine | — | cut | 55.0% | 22.0 mm/s | 1 | — | Community source |
| Alder | — | cut | 85.0% | 5.0 mm/s | 2 | — | Community source |
| Maple | — | cut | 70.0% | 15.0 mm/s | 1 | — | Community source |
| Walnut | — | cut | 70.0% | 15.0 mm/s | 1 | — | Community source |
| Cedar | — | cut | 90.0% | — | 1 | — | Community source |
| Pine | — | cut | 100.0% | — | 1 | — | Community source |
| Cherry | — | cut | 100.0% | — | 1 | — | Community source |
| Oak | — | cut | 100.0% | — | 2 | — | Community source |
| Cherry | — | engrave | 18.0% | 310.0 mm/s | 1 | — | Community source |
| Oak | — | engrave | 20.0% | 300.0 mm/s | 1 | — | Community source |
| Pine | — | engrave | 17.0% | 300.0 mm/s | 1 | — | Community source |
| Maple | — | engrave | 23.0% | 270.0 mm/s | 1 | — | Community source |
| Walnut | — | engrave | 23.0% | 270.0 mm/s | 1 | — | Community source |
| Cedar | — | engrave | 45.0% | — | 1 | 0.1 mm | Community source |
| Alder | — | engrave | 52.0% | — | 1 | 0.1 mm | Community source |
| Pine | — | engrave | 50.0% | — | 1 | 0.1 mm | Community source |
| Cherry | — | engrave | 55.0% | — | 1 | 0.1 mm | Community source |
| Oak | — | engrave | 60.0% | — | 1 | 0.1 mm | Community source |
Sponsored · Ad space available