Glowforge Basic Hardwood Settings (Cut & Engrave)
12 sourced settings for hardwood on the Glowforge Basic (45W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Cedar | — | cut | 54.0% | 20.0 mm/s | 1 | — | Community source |
| Alder | — | cut | 55.0% | 20.0 mm/s | 1 | — | Community source |
| Cherry | — | cut | 62.0% | 16.0 mm/s | 1 | — | Community source |
| Oak | — | cut | 70.0% | 14.0 mm/s | 1 | — | Community source |
| Pine | — | cut | 60.0% | 18.0 mm/s | 1 | — | Community source |
| Maple | — | cut | 75.0% | 12.0 mm/s | 1 | — | Community source |
| Walnut | — | cut | 75.0% | 12.0 mm/s | 1 | — | Community source |
| Cherry | — | engrave | 22.0% | 270.0 mm/s | 1 | — | Community source |
| Oak | — | engrave | 22.0% | 260.0 mm/s | 1 | — | Community source |
| Pine | — | engrave | 20.0% | 270.0 mm/s | 1 | — | Community source |
| Maple | — | engrave | 25.0% | 250.0 mm/s | 1 | — | Community source |
| Walnut | — | engrave | 25.0% | 250.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available