AtomStack Hurricane Hardwood Settings (Cut & Engrave)

Name: AtomStack Hurricane Hardwood Settings (Cut & Engrave)
Creator: MakerDial

13 sourced settings for hardwood on the AtomStack Hurricane (55W CO2), thickness 14, 15, 18 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Pine	14.0 mm	cut	80.0%	1.67 mm/s	1	—	Official source
Paulownia wood	14.0 mm	cut	80.0%	5.0 mm/s	1	—	Official source
Pine	15.0 mm	cut	100.0%	1.67 mm/s	1	—	Official source
Cork wood	15.0 mm	cut	100.0%	30.0 mm/s	1	—	Official source
Cork wood	15.0 mm	cut	80.0%	20.0 mm/s	1	—	Official source
Paulownia wood	18.0 mm	cut	100.0%	3.33 mm/s	1	—	Official source
Paulownia wood	18.0 mm	cut	80.0%	6.67 mm/s	2	—	Official source
Yellow peach wood	—	engrave (bitmap)	20.0%	300.0 mm/s	1	0.1 mm	Official source
Pine	—	engrave (bitmap)	20.0%	300.0 mm/s	1	0.1 mm	Official source
Paulownia wood	—	engrave (bitmap)	45.0%	250.0 mm/s	—	0.1 mm	Official source
Yellow peach wood	—	engrave (vector line)	5.0%	50.0 mm/s	1	—	Official source
Pine	—	engrave (vector line)	5.0%	58.33 mm/s	1	—	Official source
Paulownia wood	—	engrave (vector line)	6.0%	58.33 mm/s	1	—	Official source

Sponsored · Ad space available