OMTech 40W CO2 Hardwood Settings (Cut & Engrave)

Name: OMTech 40W CO2 Hardwood Settings (Cut & Engrave)
Creator: MakerDial

24 sourced settings for hardwood on the OMTech 40W CO2 (40W CO2).

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Cedar	—	cut	50.0%	22.0 mm/s	1	—	Community source
Alder	—	cut	52.0%	22.0 mm/s	1	—	Community source
Cherry	—	cut	58.0%	18.0 mm/s	1	—	Community source
Oak	—	cut	65.0%	15.0 mm/s	1	—	Community source
Pine	—	cut	55.0%	20.0 mm/s	1	—	Community source
Maple	—	cut	55.0%	19.0 mm/s	1	—	Community source
Walnut	—	cut	60.0%	17.0 mm/s	1	—	Community source
Cedar	—	cut	85.0%	6.7 mm/s	1	—	Community source
Alder	—	cut	95.0%	4.2 mm/s	2	—	Community source
Pine	—	cut	90.0%	5.8 mm/s	1	—	Community source
Cherry	—	cut	100.0%	4.2 mm/s	2	—	Community source
Oak	—	cut	100.0%	3.3 mm/s	2	—	Community source
Cedar	—	engrave	16.0%	300.0 mm/s	1	—	Community source
Alder	—	engrave	18.0%	300.0 mm/s	1	—	Community source
Cherry	—	engrave	20.0%	290.0 mm/s	1	—	Community source
Oak	—	engrave	22.0%	280.0 mm/s	1	—	Community source
Pine	—	engrave	18.0%	300.0 mm/s	1	—	Community source
Cedar	—	engrave	45.0%	400.0 mm/s	1	0.1 mm	Community source
Alder	—	engrave	55.0%	350.0 mm/s	1	0.1 mm	Community source
Pine	—	engrave	50.0%	400.0 mm/s	1	0.1 mm	Community source
Cherry	—	engrave	55.0%	350.0 mm/s	1	0.1 mm	Community source
Oak	—	engrave	60.0%	300.0 mm/s	1	0.1 mm	Community source
Maple (hardwood 3mm)	—	engrave	18.0%	350.0 mm/s	1	0.1 mm	Community source
Walnut (hardwood 3mm)	—	engrave	20.0%	300.0 mm/s	1	0.1 mm	Community source

Sponsored · Ad space available