OMTech 40W CO2 Acrylic Settings (Cut & Engrave)
18 sourced settings for acrylic on the OMTech 40W CO2 (40W CO2), thickness 3, 6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Acrylic | — | cut | 70.0% | 2.0 mm/s | 1 | — | Community source |
| Acrylic Felt | — | cut | 28.0% | 55.0 mm/s | 1 | — | Community source |
| Acrylic (3mm cast) | — | cut | 70.0% | 12.0 mm/s | 1 | — | Community source |
| 3mm Black Acrylic | 3.0 mm | cut | 70.0% | 22.0 mm/s | 1 | — | Community source |
| 3mm Tinted Acrylic | 3.0 mm | cut | 62.0% | 18.0 mm/s | 1 | — | Community source |
| 3mm Coloured Acrylic | 3.0 mm | cut | 62.0% | 14.0 mm/s | 1 | — | Community source |
| 3mm Black Acrylic | 3.0 mm | cut | 62.0% | 14.0 mm/s | 1 | — | Community source |
| 3mm Mirrored Acrylic | 3.0 mm | cut | 55.0% | 12.0 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | cut | 55.0% | 12.0 mm/s | 1 | — | Community source |
| 3mm Black Acrylic | 3.0 mm | cut | 55.0% | 12.0 mm/s | 1 | — | Community source |
| 6mm Clear Acrylic | 6.0 mm | cut | 72.0% | 6.0 mm/s | 2 | — | Community source |
| Acrylic Felt | — | engrave | 10.0% | 500.0 mm/s | 1 | — | Community source |
| Acrylic (3mm cast) | — | engrave | 20.0% | 300.0 mm/s | 1 | 0.1 mm | Community source |
| 3mm Black Acrylic | 3.0 mm | engrave | 25.0% | 350.0 mm/s | 1 | — | Community source |
| 3mm Mirrored Acrylic | 3.0 mm | engrave | 20.0% | 200.0 mm/s | 1 | 0.085 mm | Community source |
| 3mm Black Acrylic | 3.0 mm | engrave | 18.0% | 200.0 mm/s | 1 | 0.085 mm | Community source |
| 3mm Clear Acrylic | 3.0 mm | engrave | 20.0% | 200.0 mm/s | 1 | 0.085 mm | Community source |
| 6mm Clear Acrylic | 6.0 mm | engrave | 25.0% | 100.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available