OMTech 40W CO2 Foam, Rubber & Cork Settings (Cut & Engrave)

Name: OMTech 40W CO2 Foam, Rubber & Cork Settings (Cut & Engrave)
Creator: MakerDial

23 sourced settings for foam, rubber & cork on the OMTech 40W CO2 (40W CO2), thickness 3, 5, 6 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Foam	—	cut	15.0%	50.0 mm/s	1	—	Community source
Cork	—	cut	35.0%	25.0 mm/s	1	—	Community source
Cork	—	cut	45.0%	30.0 mm/s	1	—	Community source
Rubber Stamp Material	—	cut	65.0%	11.0 mm/s	1	—	Community source
Rubber Stamp Material	—	cut	85.0%	8.0 mm/s	1	—	Community source
Rubber	—	cut	85.0%	8.0 mm/s	1	—	Community source
Cork	—	cut	35.0%	28.0 mm/s	1	—	Community source
Cork	—	cut	42.0%	22.0 mm/s	1	—	Community source
EVA Foam 3mm	3.0 mm	cut	20.0%	40.0 mm/s	1	—	Community source
EVA Foam 3mm	3.0 mm	cut	22.0%	40.0 mm/s	1	—	Community source
Foam Board 5mm	5.0 mm	cut	35.0%	42.0 mm/s	1	—	Community source
EVA Foam 6mm	6.0 mm	cut	32.0%	45.0 mm/s	1	—	Community source
Foam	—	engrave	6.0%	150.0 mm/s	1	—	Community source
Cork	—	engrave	12.0%	300.0 mm/s	1	—	Community source
Rubber Stamp Material	—	engrave	22.0%	200.0 mm/s	1	—	Community source
Photopolymer Stamp Blank	—	engrave	40.0%	150.0 mm/s	1	0.051 mm	Community source
Cork	—	engrave	22.0%	250.0 mm/s	1	0.085 mm	Community source
Rubber Stamp Material	—	engrave	50.0%	150.0 mm/s	1	0.051 mm	Community source
Rubber (stamp rubber 3mm)	—	engrave	35.0%	150.0 mm/s	1	0.051 mm	Community source
EVA Foam 3mm	3.0 mm	engrave	8.0%	350.0 mm/s	1	—	Community source
EVA Foam 3mm	3.0 mm	engrave	8.0%	300.0 mm/s	1	0.085 mm	Community source
Foam Board 5mm	5.0 mm	engrave	10.0%	500.0 mm/s	1	—	Community source
EVA Foam 6mm	6.0 mm	engrave	10.0%	500.0 mm/s	1	—	Community source

Sponsored · Ad space available