OMTech 60W CO2 Foam, Rubber & Cork Settings (Cut & Engrave)

Name: OMTech 60W CO2 Foam, Rubber & Cork Settings (Cut & Engrave)
Creator: MakerDial

13 sourced settings for foam, rubber & cork on the OMTech 60W CO2 (60W CO2), thickness 5, 6 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Foam	—	cut	12.0%	70.0 mm/s	1	—	Community source
Cork	—	cut	40.0%	40.0 mm/s	1	—	Community source
Rubber Stamp Material	—	cut	50.0%	15.0 mm/s	1	—	Community source
Rubber Stamp Material	—	cut	85.0%	11.0 mm/s	1	—	Community source
Cork	—	cut	25.0%	38.0 mm/s	1	—	Community source
Foam Board 5mm	5.0 mm	cut	25.0%	58.0 mm/s	1	—	Community source
EVA Foam 6mm	6.0 mm	cut	23.0%	62.0 mm/s	1	—	Community source
Cork	—	engrave	10.0%	500.0 mm/s	1	—	Community source
Rubber Stamp Material	—	engrave	16.0%	270.0 mm/s	1	—	Community source
Photopolymer Stamp Blank	—	engrave	35.0%	200.0 mm/s	1	0.051 mm	Community source
Rubber Stamp Material	—	engrave	30.0%	200.0 mm/s	1	0.051 mm	Community source
Foam Board 5mm	5.0 mm	engrave	10.0%	500.0 mm/s	1	—	Community source
EVA Foam 6mm	6.0 mm	engrave	8.0%	500.0 mm/s	1	—	Community source

Sponsored · Ad space available