OMTech 40W CO2 Paper & Cardboard Settings (Cut & Engrave)
27 sourced settings for paper & cardboard on the OMTech 40W CO2 (40W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Cardboard | — | cut | 20.0% | 60.0 mm/s | 1 | — | Community source |
| Cardstock | — | cut | 12.0% | 80.0 mm/s | 1 | — | Community source |
| Paper | — | cut | 10.0% | 100.0 mm/s | 1 | — | Community source |
| Washi Tape | — | cut | 8.0% | 150.0 mm/s | 1 | — | Community source |
| Cardstock 300gsm | — | cut | 20.0% | 100.0 mm/s | 1 | — | Community source |
| Corrugated Cardboard | — | cut | 45.0% | 80.0 mm/s | 1 | — | Community source |
| Cardstock 300gsm | — | cut | 10.0% | 80.0 mm/s | 1 | — | Community source |
| Corrugated Cardboard | — | cut | 45.0% | 35.0 mm/s | 1 | — | Community source |
| Mylar Stencil 7.5mil | — | cut | 18.0% | 68.0 mm/s | 1 | — | Community source |
| Copy Paper 80gsm | — | cut | 12.0% | 100.0 mm/s | 1 | — | Community source |
| Cardstock 300gsm | — | cut | 18.0% | 85.0 mm/s | 1 | — | Community source |
| Mylar Stencil 7.5mil | — | cut | 20.0% | 50.0 mm/s | 1 | — | Community source |
| Corrugated Cardboard | — | cut | 45.0% | 22.0 mm/s | 1 | — | Community source |
| Kraft Paper | — | cut | 12.0% | 80.0 mm/s | 1 | — | Community source |
| Cardstock | — | cut | 15.0% | 60.0 mm/s | 1 | — | Community source |
| Cardstock | — | engrave | 6.0% | 300.0 mm/s | 1 | — | Community source |
| Cardstock 300gsm | — | engrave | 8.0% | 300.0 mm/s | 1 | — | Community source |
| Corrugated Cardboard | — | engrave | 15.0% | 200.0 mm/s | 1 | — | Community source |
| Cardstock 300gsm | — | engrave | 6.0% | 400.0 mm/s | 1 | — | Community source |
| Corrugated Cardboard | — | engrave | 15.0% | 500.0 mm/s | 1 | — | Community source |
| Copy Paper 80gsm | — | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
| Cardstock 300gsm | — | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
| Kraft Paper | — | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
| Paper | — | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
| Cardboard | — | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
| Corrugated Cardboard | — | engrave | 18.0% | 300.0 mm/s | 1 | 0.085 mm | Community source |
| Cardstock | — | engrave | 8.0% | 300.0 mm/s | 1 | 0.085 mm | Community source |
Sponsored · Ad space available
More
- All OMTech 40W CO2 settings
- Glowforge Basic paper & cardboard settings
- Glowforge Plus paper & cardboard settings
- Glowforge Pro paper & cardboard settings
- K40 CO2 35W paper & cardboard settings
- Monport GP 40W CO2 paper & cardboard settings
- OMTech 60W CO2 paper & cardboard settings
- Laser engraving pricing calculator