OMTech 60W CO2 Paper & Cardboard Settings (Cut & Engrave)

Name: OMTech 60W CO2 Paper & Cardboard Settings (Cut & Engrave)
Creator: MakerDial

19 sourced settings for paper & cardboard on the OMTech 60W CO2 (60W CO2).

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Cardboard	—	cut	15.0%	100.0 mm/s	1	—	Community source
Kraft Paper	—	cut	8.0%	150.0 mm/s	1	—	Community source
Cardstock	—	cut	10.0%	120.0 mm/s	1	—	Community source
Paper	—	cut	8.0%	150.0 mm/s	1	—	Community source
Washi Tape	—	cut	6.0%	200.0 mm/s	1	—	Community source
Cardstock 300gsm	—	cut	16.0%	130.0 mm/s	1	—	Community source
Corrugated Cardboard	—	cut	35.0%	100.0 mm/s	1	—	Community source
Corrugated Cardboard	—	cut	32.0%	48.0 mm/s	1	—	Community source
Mylar Stencil 7.5mil	—	cut	12.0%	90.0 mm/s	1	—	Community source
Copy Paper 80gsm	—	cut	9.0%	130.0 mm/s	1	—	Community source
Cardstock 300gsm	—	cut	12.0%	110.0 mm/s	1	—	Community source
Corrugated Cardboard	—	engrave	10.0%	500.0 mm/s	1	—	Community source
Mylar Stencil 7.5mil	—	engrave	8.0%	500.0 mm/s	1	—	Community source
Copy Paper 80gsm	—	engrave	8.0%	500.0 mm/s	1	—	Community source
Cardstock 300gsm	—	engrave	8.0%	500.0 mm/s	1	—	Community source
Cardstock	—	engrave	8.0%	500.0 mm/s	1	—	Community source
Kraft Paper	—	engrave	8.0%	500.0 mm/s	1	—	Community source
Paper	—	engrave	8.0%	500.0 mm/s	1	—	Community source
Cardboard	—	engrave	8.0%	500.0 mm/s	1	—	Community source

Sponsored · Ad space available