Ortur Master 3 Fabric & Felt Settings (Cut & Engrave)
10 sourced settings for fabric & felt on the Ortur Master 3 (10W diode).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Cotton Fabric | — | cut | 100.0% | 16.7 mm/s | 1 | — | Community source |
| Felt | — | cut | 80.0% | 50.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 85.0% | 41.7 mm/s | 1 | — | Community source |
| Denim Fabric | — | cut | 55.0% | 21.7 mm/s | 2 | — | Community source |
| Felt | — | cut | 80.0% | 11.7 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 75.0% | 8.3 mm/s | 1 | — | Community source |
| Cotton Fabric | — | engrave | 100.0% | 333.3 mm/s | 1 | 0.1 mm | Community source |
| Felt | — | engrave | 35.0% | 33.3 mm/s | 1 | — | Community source |
| Cotton Fabric | — | engrave | 28.0% | 91.7 mm/s | 1 | — | Community source |
| Denim Fabric | — | engrave | 32.0% | 75.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available