xTool D1 Pro 20W Fabric & Felt Settings (Cut & Engrave)
14 sourced settings for fabric & felt on the xTool D1 Pro 20W (20W diode).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Denim Fabric | — | cut | 72.0% | 58.3 mm/s | 1 | — | Community source |
| Felt | — | cut | 70.0% | 75.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 70.0% | 66.7 mm/s | 1 | — | Community source |
| Denim Fabric | — | cut | 45.0% | 25.0 mm/s | 2 | — | Community source |
| Felt | — | cut | 80.0% | 11.7 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 78.0% | 7.5 mm/s | 1 | — | Community source |
| Felt (3mm craft felt) | — | cut | 55.0% | 6.7 mm/s | 1 | — | Community source |
| Denim Fabric | — | engrave | 45.0% | 83.3 mm/s | 1 | — | Community source |
| Felt | — | engrave | 30.0% | 108.3 mm/s | 1 | — | Community source |
| Cotton Fabric | — | engrave | 35.0% | 116.7 mm/s | 1 | — | Community source |
| Felt | — | engrave | 35.0% | 33.3 mm/s | 1 | — | Community source |
| Felt | — | engrave | 25.0% | 33.3 mm/s | 1 | — | Community source |
| Cotton Fabric | — | engrave | 22.0% | 116.7 mm/s | 1 | — | Community source |
| Denim Fabric | — | engrave | 25.0% | 91.7 mm/s | 1 | — | Community source |
Sponsored · Ad space available