xTool S1 40W diode Fabric & Felt Settings (Cut & Engrave)
10 sourced settings for fabric & felt on the xTool S1 40W diode (40W diode).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Denim Fabric | — | cut | 52.0% | 100.0 mm/s | 1 | — | Community source |
| Felt | — | cut | 48.0% | 116.7 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 50.0% | 100.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | cut | 35.0% | 33.3 mm/s | 2 | — | Community source |
| Felt | — | cut | 65.0% | 20.0 mm/s | 1 | — | Community source |
| Cotton Fabric | — | cut | 60.0% | 13.3 mm/s | 1 | — | Community source |
| Felt | — | engrave | 5.0% | 200.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | engrave | 30.0% | 133.3 mm/s | 1 | — | Community source |
| Cotton Fabric | — | engrave | 16.0% | 150.0 mm/s | 1 | — | Community source |
| Denim Fabric | — | engrave | 18.0% | 116.7 mm/s | 1 | — | Community source |
Sponsored · Ad space available